Hydraulic test benches
Single station demonstration bench
Technical description
Main functions
The single-user faucet demonstration bench allows simple tests to be carried out on all types of faucets (electronic faucets, mixing faucets, mechanical mixing faucets, thermostatic mixing faucets, simple faucets, timed faucets).
This equipment is designed for specialist shops that wish to have a system that allows them to carry out quick tests or to demonstrate the correct operation of a tap. The system can also be used to demonstrate the operation of a tap at trade fairs or in a showroom.
Operating mode
After installing the valves to be tested, the user sets the independent inlet pressures (hot / cold water). The bench manages the pressure control.
The screen displays the pressure, temperature and flow measurements of hot and cold water.
Functions :
- flow rate measurement
- temperature measurement
- regulation and measurement of inlet pressures
- independent pressure variation on hot and cold
Examples of possible applications :
- measuring the flow rate of water from the hard point on a mechanical mixing valve (corresponds to the "economy" position)
- limiting the temperature of the mechanical mixing valve
- ensuring the correct temperature setting of a thermostatic mixing valve
- measuring the flow rate and duration of flow on a timed mixing valve
Characteristics |
HydroShow-one15 | HydroShow-one25 | HydroShow-one35 |
Maximum flow rate |
2×15 l/min | 2×25 l/min | 2×35 l/min |
Maximum pressure of the pressure generator |
6 bar | 6 bar | 6 bar |
Minimum pressure of the pressure generator |
bench supply pressure | ||
Pressure measurement |
± 0,02 bar | ± 0,02 bar | ± 0,02 bar |
Temperature measurement |
± 0,3°C | ± 0,3°C | ± 0,3°C |
Flow measurement |
± 0,3 l/min | ± 0,3 l/min | ± 0,3 l/min |
Advantages
- Simplicity of use
- Very compact and transportable equipment