Hydraulic test benches
Temperature cycling for thermostats
Reference
: ThermoSwitch
Technical description
Main functions
Temperature cycling test bench for thermostats/temperature sensors. The cycling test rig controls the heating or cooling ramps
Operating mode
The bench allows simultaneous control of heating and cooling ramps of 10 mechanical thermostats. It allows to make series of cycles programmable by PC.
The switching temperature of the thermostats is automatically indicated on both the up and down sides for each thermostat.
The switching values of the thermostats are archived in the form of a table that can be used in Excel.
A display shows the temperature slopes and the status of each thermostat, as well as a table of the recorded switching values.
- Stainless steel frame
- Closed loop pressurised hydraulic system
- Integrated heating and cooling
- Programmable tests
- PC control
Heating capacity
2 000 W
Cooling capacity
1 900 W
Power supply
230 VAC / 50hz
Electrical power
3 KW
Minimum temperature
16°C
Maximum temperature
95°C
Minimum ramp
0,5°C/mn
Maximum ramp
4°C/mn
Temperature accuracy
+ 0,3°C
Width
1 550 mm
Depth
800 mm
Height
1 530 mm
Weight
200 kg
Surface finish
Stainless steel finish
