Hydraulic test benches
Multi-station demonstration bench

Reference : HydroShow-multi

Areas of application :

Technical description

Main functions

The multi-station tap demonstration bench allows simple tests to be carried out on all types of tap (electronic tap, mixing tap, mechanical mixing tap, thermostatic mixing tap, single tap, timed tap).

This equipment is designed for specialist shops that wish to have a system that allows them to carry out quick tests or to demonstrate the correct operation of a tap. The system can also be used to demonstrate the operation of a tap at trade fairs or in a showroom.

The bench is equipped with 5 test lines to compare the function of several faucets.

Operating mode

After installing the taps to be tested, the user sets the independent inlet pressures (hot / cold water). The bench manages the pressure control.

The screen displays the pressure, temperature and flow measurements of hot and cold water.

Functions :

flow rate measurement
temperature measurement
regulation and measurement of inlet pressures
independent pressure variation on hot and cold

Examples of possible applications:

measuring the flow rate of water from the hard point on a mechanical mixing valve (corresponds to the "economy" position)
limiting the temperature of the mechanical mixing valve
ensuring the correct temperature setting of a thermostatic mixing valve
measuring the flow rate and duration of flow on a timed mixing valve

Characteristics	HydroShow-multi15	HydroShow-multi25	HydroShow-multi35
Maximum flow rate	2×15 l/min	2×25 l/min	2×35 l/min
Maximum pressure of the pressure generator	6 bar	6 bar	6 bar
Minimum pressure of the pressure generator	bench supply pressure
Pressure measurement	± 0,02 bar	± 0,02 bar	± 0,02 bar
Temperature measurement	± 0,3°C	± 0,3°C	± 0,3°C
Flow rate measurement	± 0,3 l/min	± 0,3 l/min	± 0,6 l/min
Inlet pressure	0 à 4 bar	0 à 4 bar	0 à 4 bar
Output pressure	6 à 10 bar	6 à 10 bar	6 à 10 bar