Hydraulic test benches
Thermostatic valves
Technical description
Main functions
The thermostatic performance test bench is a test bench for studying the hydraulic performance of thermostatic mixing valves and limiters. This test bench allows the precise analysis of the reaction of the devices to variations in temperature (EC), flow and pressure (EC, EF), etc...
Operating mode
The test bench generates pressure through servo pumps and controls the motion of the control levers of mixers and limiters by means of motorized actuators. These actuators are installed on a "C" beam that allows flexible fixing on all types of taps. When the devices to be tested are positioned on the test bench, the pre-programmed test scenarios will take place to actuate the faucet, to measure pressures, flow rates and temperatures, etc.
Characteristics of the device
- Orientation and positioning stage for the device to be tested
- Automatic operation actuators for all types of faucets
- Stainless steel frame
- PC control
Technical specifications
- Operation of self-learning servo controls
- Closed-loop pressure generation (Hot water, Cold water) from 0 to 6 bar (± 0.05) from 0 to 2×25 l/min
- Instant pressure variation by programming
- Operation force and torque 100N; 6Nm
- Automatic integration of test standards into software
- Automatic redaction and editing of test reports according to selected standards
- Archiving and data transmission
- Optimization of water recovery (hot-cold)
- The assembly includes :
- 2 pumps
- 2 to 3 servo motors
- 2 to 3 pressure sensors
- 2 flowmeters
- 4 temperature measurements
Advantages
- Quick and easy installation of faucets of any form
- Automatic tests without manual interventio
- Reproducibility of test
- Standard tests according to NF, EN, ASSE, NHS standards
- Automatic test analyses and reports