Hydraulic test benches
Single station demonstration bench

Reference : HydroShow-one
Areas of application :
Request a quote

Technical description

Main functions

The single-user faucet demonstration bench allows simple tests to be carried out on all types of faucets (electronic faucets, mixing faucets, mechanical mixing faucets, thermostatic mixing faucets, simple faucets, timed faucets).

This equipment is designed for specialist shops that wish to have a system that allows them to carry out quick tests or to demonstrate the correct operation of a tap. The system can also be used to demonstrate the operation of a tap at trade fairs or in a showroom.

 

Operating mode

After installing the valves to be tested, the user sets the independent inlet pressures (hot / cold water). The bench manages the pressure control.

The screen displays the pressure, temperature and flow measurements of hot and cold water.

 

Functions :

  • flow rate measurement
  • temperature measurement
  • regulation and measurement of inlet pressures
  • independent pressure variation on hot and cold

 

Examples of possible applications :

  • measuring the flow rate of water from the hard point on a mechanical mixing valve (corresponds to the "economy" position)
  • limiting the temperature of the mechanical mixing valve
  • ensuring the correct temperature setting of a thermostatic mixing valve
  • measuring the flow rate and duration of flow on a timed mixing valve


 

 

Characteristics

HydroShow-one15 HydroShow-one25 HydroShow-one35

Maximum flow rate
2×15 l/min 2×25 l/min 2×35 l/min

Maximum pressure of the pressure generator
6 bar 6 bar 6 bar

Minimum pressure of the pressure generator
bench supply pressure

Pressure measurement
± 0,02 bar ± 0,02 bar ± 0,02 bar

Temperature measurement
± 0,3°C ± 0,3°C ± 0,3°C

Flow measurement
± 0,3 l/min ± 0,3 l/min ± 0,3 l/min

 


Advantages

  • Simplicity of use
  • Very compact and transportable equipment

Ihm

Human-computer interface

Contact
French Fab